Zoek in de blog

Er zijn 61 posts die overeenkomen met deze filters.

A handmade folding memo notepad made from printed and folded pages
DIY

How to make a Folding Memo Notepad

Four glue-bound memo pads mounted inside one folding chipboard cover — with the full cutting plan, panel measurements and binding steps.

6 min lezen
A handmade DIY planner box used to store and display planner supplies
DIY

How to Make a DIY Planner Box — Step-by-Step Chipboard Tutorial

A lidded chipboard box with a personal-size planner on rings inside the lid and room for pens, sticker sheets and memo pads in the tray underneath.

8 min lezen
A handmade memo notepad block holder, the finished make from this DIY tutorial
DIY

DIY Memo Notepad Block Holder: How to Make a Desk Memo Box

A shallow chipboard box that holds a 600-sheet memo block — five wall pieces wrapped in one printed sticker sheet and folded square, with no glue anywhere in the build.

6 min lezen
Standing refillable notepad with custom designs
DIY

DIY Standing Refillable Notepad: Desk Pad with a Fold-Out Easel Back

Seven chipboard panels wrapped in one printed sheet fold into a desk easel, and two Chicago screws let you swap the pages when the pad runs out.

7 min lezen
A handmade foldable planner, the finished make from this step-by-step DIY guide
DIY

How to Make a Folding Planner

A hinged chipboard cover carrying two separate wire bindings — the month view on the top half, the week view on the bottom, folding down to pocket size.

7 min lezen
A handmade folding gratitude journal with morning and evening gratitude pages
DIY

DIY Gratitude Notebook: How to Make a Folding Gratitude Journal

A morning pad and an evening pad in sticker-wrapped 1.2mm chipboard covers, wire-bound and hinged down the middle so the pair folds shut on the desk.

7 min lezen
A handmade sliding notebook with tear-off paper inserts, the finished project from this DIY build
DIY

DIY Sliding Notebook with Tear-Off Inserts — Step-by-Step Tutorial

A slot cut into the front cover lets it slide along two Chicago screws, while the perforated inserts tear out cleanly and refill without undoing the binding.

6 min lezen
DIY refillable journal with custom hardcover
DIY

DIY Refillable Journal: A5 Hardcover with a Hinged Spine

An A5 journal with a 1.2mm chipboard hardcover that folds on a 3mm hinge and two 18mm Chicago screws — undo them by hand and swap in a fresh stack of pages.

6 min lezen
A handmade 2025 weekly desk planner, the finished project from this DIY build
DIY

How to Make a Weekly Desk Planner

A standing weekly calendar: one week per 7.5 x 21 cm page, wire-bound between two wrapped chipboard covers, with a folded paper strip glued inside that props the whole thing up on the desk.

7 min lezen
Homemade sticky notes made at home from printed Planify Pro designs
DIY

How to Make Sticky Notes at Home: DIY Step-by-Step Guide

Six 3-inch sticky note designs on one A4 sheet — print, cut, stack, glue a 1.5 cm band of repositionable glue along the top edge and trim into pads.

6 min lezen
Handmade planner book with custom printed pages
DIY

DIY Planner Book: How to Print and Bind a Full Dated Year

A full year of dated pages, trimmed to the crop marks, punched in batches and closed into a twin-loop wire between two board covers you wrapped yourself.

8 min lezen
A Planify Pro FAQ graphic on what you need to start a planner shop, used as the cover image for this desk calendar tutorial
DIY

DIY Desk Calendar: How to Make Your Own Step by Step

A flip-through desk calendar with chipboard covers wrapped in printed sticker paper, wire-bound down both side edges so it stands on a desk and turns cleanly.

6 min lezen