모든 게시물

전체 블로그에서 151개의 게시물이 있습니다.

Finished DIY perforated notepad with tear-off pages
DIY

DIY Perforated Notepad: How to Make a Tear-Off Notepad at Home

Add clean tear-off lines to a handmade notepad using a perforating cutter and PVA glue binding — one extra step that makes it look shop-bought.

3분 읽기
Making a DIY stacked notepad: the build in progress, the project title, and the finished three-layer pad on one chipboard backing.
DIY

DIY Stacked Notepad: How to Make a Multi-Layer Notepad with PVA Glue

Three notepads of different lengths glued and stacked on one chipboard back, so each section's top edge stays visible — to-do, brain dump and notes in one pad.

4분 읽기
Making a DIY refillable notepad: the build in progress, the project title, and the finished pad in a chipboard cover bound with Chicago screws.
DIY

DIY Refillable Notepad: How to Make a Notepad with Chicago Screw Binding

150 pages held by two Chicago screws in a three-panel chipboard cover — no glue, no wire, and no special equipment beyond a hole punch.

4분 읽기
Making a DIY notepad set: the build in progress, the project title, and the finished nine mini notepads arranged on a chipboard base.
DIY

DIY Notepad Set: How to Make 9 Mini Notepads with PVA Glue Binding

One printed sheet cuts into nine mini notepads, each PVA-bound and mounted back into its original position on a 14 × 14 cm chipboard base.

4분 읽기
Making a DIY hardbound planner: the build in progress, the project title, and the finished 30-month planner in its hard cover.
DIY

DIY Hardbound Planner: How to Make a 30-Month Hard Cover Planner Book

120 folded pages glued into a proper book block, finished with a headband and cased into a three-panel hard cover. The most book-like build in the library.

6분 읽기
Making a DIY pocket bullet journal: the build in progress, the project title, and the finished journal with hidden wire binding and cover pocket.
DIY

DIY Pocket Bullet Journal with Hidden Wire Binding and Pocket Cover

A pocket-sized journal with concealed o-wire binding and a fold-over pocket built into the cover for cards, receipts and loose notes.

5분 읽기
Making a DIY notepad set: the build in progress, the project title, and the finished weekly planner and to-do pads in one folding cover.
DIY

DIY Notepad Set: Weekly Planner and To-Do List with Custom Covers

A matching pair of PVA-bound pads — weekly planner and to-do list — mounted side by side in one folding chipboard cover.

4분 읽기
Making a DIY corner-bound notebook: the build in progress, the project title, and the finished notebook bound diagonally through one corner.
DIY

DIY Corner-Bound Notebook: Brain Dump Journal with Wire Binding

Wire binding rotated 45° — one corner cut off every page and punched, so the notebook flips open diagonally instead of along a spine.

4분 읽기
Making a DIY back to back notepad: the build in progress, the project title, and the finished double-sided pad with a planner on one face.
DIY

DIY Back to Back Notepad: Double-Sided Planner Pad Tutorial

One chipboard board sandwiched between two page stacks and glued at both ends — a project planner on one face, task lists on the other. Turn it over to switch.

4분 읽기
Finished half-hidden wire bound notebook with printed cover
DIY

DIY Wire Bound Notebook: Half-Hidden Wire Binding Tutorial

A wire-bound A6 notebook whose printed spine strip folds over the loops, so the binding sits half concealed instead of exposed along the edge.

6분 읽기
Finished DIY lay-flat sketchbook with a custom printed cover
DIY

How to Make a DIY Lay Flat Sketchbook — Bookbinding Tutorial

Every page is a sheet folded in half with only the folds glued to the spine, so the finished sketchbook drops open at any page and stays there.

8분 읽기
Finished Coptic stitch bound booklet with exposed spine and printed cover
DIY

DIY Booklet Binding Tutorial: How to Make Booklets with Signatures

Fold your printed sheets into nested signatures and chain them together with a Coptic stitch — an exposed-spine booklet that opens completely flat.

7분 읽기