All posts
148 posts across the whole blog.
DIY Bill Planner: How to Make a 12-Month Bill Organizer with Wire Binding
Twelve pages folded into envelopes — one pocket per month for receipts and bills — bound on o-wires between wrapped chipboard covers.
4 min read
DIY Sliding Calendar: How to Make an Adjustable Standing Desk Calendar
Two folded cardstock triangles, one sliding inside the other — an undated desk calendar you set by hand and reuse every year. Glue is the only fixing.
4 min read
DIY Bentobox Notepad: How to Make a Bento-Style Meal Planner Station
Several small PVA-bound pads laid out like bento compartments inside a five-panel folding chipboard cover — one section per meal category.
5 min read
DIY Double Refillable Notepad: Two-Section Notepad with Fastener Binding
Two refillable notepad sections joined by a chipboard hinge so the whole thing opens like a book — work on one side, personal on the other, both swappable.
6 min read
DIY Chore Checklist Flipcards: Reusable Laminated Cleaning Cards on a Ring
One laminated card per room, all on a single ring — tick the tasks off with a dry-erase marker, wipe it clean, and use the same set again next week.
4 min read
DIY Weekly Planner: How to Make a Wire-Bound Planner with Magnetic Closure
A wire-bound weekly planner with a magnetic flap that snaps it shut and a small PVA-bound notepad stuck inside the back cover.
6 min read
DIY To-Do Mousepad: How to Make a Notepad Mousepad for Your Desk
A tear-off to-do pad glued to a chipboard and rubber foam base, so your task list lives under your mouse hand instead of somewhere else on the desk.
4 min read
DIY Meal Planner Notepad: Weekly Planner with Tear-Off Grocery List
One page, two halves: a weekly meal planner on top and a grocery list below, split by a perforated line so the shopping list tears off and goes to the shop.
4 min read
DIY Horizontal Desk Planner: Landscape Wire-Bound Standing Planner
A landscape weekly planner bound on o-wires, standing on a back cover folded from a single sheet of cardstock into a W — no chipboard, no separate frame.
4 min read
DIY Notepad with Cover: Custom Folding Chipboard Notepad with PVA Binding
A PVA-bound notepad housed in a four-panel folding chipboard case that wraps around it — plus an optional clock on the headboard.
5 min read
DIY Clipboard Notepad: Refillable Notepad with Clipboard Clip and Folding Cover
A three-panel folding cover with a real clipboard clip riveted to the front and a cardstock holder inside that takes a fresh PVA-bound pad whenever the last one runs out.
5 min read
DIY Custom Notepad: Quick PVA Glue Notepad with Chipboard Backing
The simplest notepad in the library — print, trim, stack on a chipboard back, and brush PVA along the top edge. Two steps and ten minutes of drying.
3 min read