Search the blog

9 posts match these filters.

Finished DIY refillable notepad with a chipboard hard cover and Chicago screws
DIY

DIY Refillable Notepad: How to Make a Notepad with Chicago Screw Binding

150 pages held by two Chicago screws in a three-panel chipboard cover — no glue, no wire, and no special equipment beyond a hole punch.

4 min read
Finished DIY double refillable notepad open with two fastener-bound sections
DIY

DIY Double Refillable Notepad: Two-Section Notepad with Fastener Binding

Two refillable notepad sections joined by a chipboard hinge so the whole thing opens like a book — work on one side, personal on the other, both swappable.

6 min read
Finished DIY clipboard notepad with a clip on the front and a refillable pad inside
DIY

DIY Clipboard Notepad: Refillable Notepad with Clipboard Clip and Folding Cover

A three-panel folding cover with a real clipboard clip riveted to the front and a cardstock holder inside that takes a fresh PVA-bound pad whenever the last one runs out.

5 min read
Finished lemon-themed DIY refillable notepad bound with Chicago screws
DIY

DIY Refillable Notepad with Chicago Screws: Lemon-Themed Notepad Tutorial

A small refillable notepad with a lemon-print chipboard cover, held together by two 18mm Chicago screws you can undo by hand to swap the pages.

4 min read
Finished dual-section DIY refillable notepad bound with four Chicago screws
DIY

DIY Refillable Notepad with Chicago Screws: Dual-Section Notepad Tutorial

Two independently bound notepad sections in one body — three chipboard covers and four Chicago screws, so you can refill either half without touching the other.

6 min read
Finished DIY refillable journal with a printed hardcover and Chicago screw binding
DIY

DIY Refillable Journal: How to Make a Refillable Journal with Chicago Screws

A hardcover journal bound on Chicago screws — unscrew it by hand to swap the pages, so the cover is permanent and the contents never are.

5 min read
DIY refillable journal with custom hardcover
DIY

DIY Refillable Journal: A5 Hardcover with a Hinged Spine

An A5 journal with a 1.2mm chipboard hardcover that folds on a 3mm hinge and two 18mm Chicago screws — undo them by hand and swap in a fresh stack of pages.

6 min read
Standing refillable notepad with custom designs
DIY

DIY Standing Refillable Notepad: Desk Pad with a Fold-Out Easel Back

Seven chipboard panels wrapped in one printed sheet fold into a desk easel, and two Chicago screws let you swap the pages when the pad runs out.

7 min read
A handmade refillable notepad with tear-off pages, the finished result of this DIY build
DIY

DIY Refillable Notepad: How to Make an A6 Pad with a Wrap-Around Cover

An A6 pad held on two Chicago screws in a wrapped chipboard cover — undo them by hand, drop in a freshly punched stack, and the same cover keeps going.

6 min read