Search the blog
28 posts match these filters.
DIY Back to Back Notepad: Double-Sided Planner Pad Tutorial
One chipboard board sandwiched between two page stacks and glued at both ends — a project planner on one face, task lists on the other. Turn it over to switch.
4 min read
DIY Notepad Set: Weekly Planner and To-Do List with Custom Covers
A matching pair of PVA-bound pads — weekly planner and to-do list — mounted side by side in one folding chipboard cover.
4 min read
DIY Notepad Set: How to Make 9 Mini Notepads with PVA Glue Binding
One printed sheet cuts into nine mini notepads, each PVA-bound and mounted back into its original position on a 14 × 14 cm chipboard base.
4 min read
DIY Refillable Notepad: How to Make a Notepad with Chicago Screw Binding
150 pages held by two Chicago screws in a three-panel chipboard cover — no glue, no wire, and no special equipment beyond a hole punch.
4 min read
DIY Stacked Notepad: How to Make a Multi-Layer Notepad with PVA Glue
Three notepads of different lengths glued and stacked on one chipboard back, so each section's top edge stays visible — to-do, brain dump and notes in one pad.
4 min read
DIY Folding Notepad Station: Multi-Section Desktop Notepad Organizer
Three small PVA-bound pads on a scored chipboard base that folds shut like a book — to-do, reminders and notes in one square on the desk.
5 min read
DIY Bentobox Notepad: How to Make a Bento-Style Meal Planner Station
Several small PVA-bound pads laid out like bento compartments inside a five-panel folding chipboard cover — one section per meal category.
5 min read
DIY Double Refillable Notepad: Two-Section Notepad with Fastener Binding
Two refillable notepad sections joined by a chipboard hinge so the whole thing opens like a book — work on one side, personal on the other, both swappable.
6 min read
DIY To-Do Mousepad: How to Make a Notepad Mousepad for Your Desk
A tear-off to-do pad glued to a chipboard and rubber foam base, so your task list lives under your mouse hand instead of somewhere else on the desk.
4 min read
DIY Notepad with Cover: Custom Folding Chipboard Notepad with PVA Binding
A PVA-bound notepad housed in a four-panel folding chipboard case that wraps around it — plus an optional clock on the headboard.
5 min read
DIY Clipboard Notepad: Refillable Notepad with Clipboard Clip and Folding Cover
A three-panel folding cover with a real clipboard clip riveted to the front and a cardstock holder inside that takes a fresh PVA-bound pad whenever the last one runs out.
5 min read
DIY Custom Notepad: Quick PVA Glue Notepad with Chipboard Backing
The simplest notepad in the library — print, trim, stack on a chipboard back, and brush PVA along the top edge. Two steps and ten minutes of drying.
3 min read